Difference between revisions of "Wood Turning"
From RiceFamily Wiki
(→Misc Parts needed for making Pens) |
(→Misc Parts needed for making Pens) |
||
| Line 18: | Line 18: | ||
* Epoxy | * Epoxy | ||
** 5 Minute Epoxy (needs 24 hours to fully cure] | ** 5 Minute Epoxy (needs 24 hours to fully cure] | ||
| − | * | + | * Finishing |
| − | ** 150 | + | ** [https://www.amazon.com/Peachtree-Woodworking-Supply-Multi-Roll-Automotive/dp/B0045WIZHO 150/180/220/320/400 Sandpaper set] |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
** [https://www.amazon.com/Penn-State-Industries-PKSWEEE-Woodturners/dp/B0B5Y67GJW EEE-Ultra Shine] | ** [https://www.amazon.com/Penn-State-Industries-PKSWEEE-Woodturners/dp/B0B5Y67GJW EEE-Ultra Shine] | ||
** [https://www.amazon.com/Micro-Mesh-Pen-Sanding-Kit/dp/B0037MEIT2 Micromesh Pads] | ** [https://www.amazon.com/Micro-Mesh-Pen-Sanding-Kit/dp/B0037MEIT2 Micromesh Pads] | ||
| − | ** Sanding Sealer | + | ** [Sanding Sealer] |
| − | ** Friction Polish | + | ** [https://www.amazon.com/Doctors-Woodshop-Pens-Plus-16oz/dp/B07YSZRX9T Friction Polish] |
| − | ** Wax Finish | + | ** Wax Finish - Carnuba Wax |
* Gloves | * Gloves | ||
* Drill Bits | * Drill Bits | ||
Revision as of 04:49, 29 July 2024
Finishes
Pen Turning
- Pen Turning 101 with Rob Austin
- How FREE plastic waste can be turned into $75 pens - Interesting!
- 84 Bulk Slimline Pen Kits - $130
- 20 Pack Pen Kits - $60 Twist Pen
- 12 Pack Pen Kits - $36 Twist Pen
- 50 Wood Pen Blanks - $41 Wood Blanks (Black Walnut, Cherrywood, Peltogyne, Zebrawood, Bubinga
- Black Empty Pen Gift Boxes = 42 for $27.59
Misc Parts needed for making Pens
- Pen Mandrel
- Pen Bushings
- 7mm
- End Mill for pen blanks - O'SKOOL Pen Barrel Trimmer - Carbide cutters
- Epoxy
- 5 Minute Epoxy (needs 24 hours to fully cure]
- Finishing
- 150/180/220/320/400 Sandpaper set
- EEE-Ultra Shine
- Micromesh Pads
- [Sanding Sealer]
- Friction Polish
- Wax Finish - Carnuba Wax
- Gloves
- Drill Bits
- Disk Sander
Jigs
- Make a Jig for cutting the Blanks to the right length for Slimline Pens on the Bandsaw
