Difference between revisions of "Water Depth sensing system"

From RiceFamily Wiki
Jump to: navigation, search
(Water Depth Sensors)
(Water Depth Sensors)
Line 14: Line 14:
 
* [https://www.youtube.com/watch?v=g_7txTdy-tg Water Depth Sensor using MS5540C and Arduino]
 
* [https://www.youtube.com/watch?v=g_7txTdy-tg Water Depth Sensor using MS5540C and Arduino]
 
* [https://www.instrumart.com/categories/6123/level-transmitters?gclid=EAIaIQobChMIk7vEjvKO7AIVgo7ICh0SzAdPEAAYASAAEgLNBvD_BwE#filters=f409-1404 Level Transmitters]
 
* [https://www.instrumart.com/categories/6123/level-transmitters?gclid=EAIaIQobChMIk7vEjvKO7AIVgo7ICh0SzAdPEAAYASAAEgLNBvD_BwE#filters=f409-1404 Level Transmitters]
 +
* [http://www.sendo-sensor.com/products-lists-c-70.html?gclid=EAIaIQobChMI69O2lcaP7AIVgcDICh19fwevEAAYAiAAEgIcm_D_BwE Sendo Sensors for Water Pressure]
  
 
= Technology Behind Pressure Sensors =
 
= Technology Behind Pressure Sensors =

Revision as of 23:54, 29 September 2020

Overview

The level of the Lake varies after rain storms. It would be nice to know how much, and to be able to review this information remotely. A Raspberry Pi and a depth sensor should allow this to work given a fixed sensor at a "Known" depth. The idea being to determine how much water is above the sensor at any given time.

The Raspberry Pi doesn't have an on-board ADC so an additional circuit is required to register voltage increases from sensors.

Water Depth Sensors

Technology Behind Pressure Sensors

Possible Alternate Sensor Technology

  • Optomax Digital Liquid Level Sensor - It's a Binary On/Off switch, but could be used to detect the simple presence of water at a given level in or below a building. IE: Has water reached the joists? Is water inside the cabin?